Shopping Cart
Доступные варианты
Breath Shield for Topographer, Zeiss Atlas
Add to Compare
Breath Shield for Topographer, Zeiss Atlas.
- Material: Acrylic
- Easy to clean. See cleaning instructions below. Do not use alcohol: stress crazing, which appears as an area of tiny micro-cracks may occur.
- Good resistance to scratches
- Thick (1/8 in / 3mm), not flexible.
Breath Shield is a clear plastic barrier to block breath between patient and doctor. A must-have ophthalmic accessory.
The Breath Shield is easy to install and remove. Comes with protective covering. The breath shields are clear, please remove protective film from both sides (google: "how to remove film masking from acrylic video" if needed).
Cleaning instructions for ACRYLIC breath shield:
Use mild soap or detergent and plenty of lukewarm water. Use a clean soft cloth, applying only light pressure. Rinse with clear water and dry by blotting with a damp cloth.
For disinfection use 3% hydrogen peroxide. Grease or oil may be removed with kerosene.
Do Not Use: alcohol, window cleaning sprays, kitchen scouring compounds, or solvents. Damage may occur.
We recommend Crystalclean antistatic/cleaner.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Inquiry about the product Breath Shield for Topographer, Zeiss Atlas
Your Name:Your Email:
Message: Note: HTML is not translated!
Enter the code in the box below:
